Resources:
Full Plate File
Half Plate File
Non-metal Accent (threaded inserts required)
Internal Weight
VIAL Compatible Firmware
O-ring Specifications:
OD (Outer Diameter): 26mm
CS (Cross Sectional Diameter): 3.1mm
Material: Viton (FKM)
Firmware Flashing Guide:
- Connect your PCB to your PC.
- Short the two pins that are labeled USB_BOOT on the bottom side of the PCB (underneath the delete key)
- A window that leads to your PCB's bootloader should appear on your file directory (it will appear as a drive).
- Drag and drop the firmware file that you want to flash into the window.
- Disconnect the PCB from your PC.
- Your new firmware should now be flashed!
